Baulk paint stripper

Deep penetration — removes several layers of paint in a single application. This will indicate the time required for project completion and suitability of product for the paint and substrate. Use Strip Away where there are multi-layers of traditional oil-based paints gloss, undercoat, varnish , or, water-based household paints emulsions or marine paints on: First apply a light coat of approximately 10 mils microns , allow it to dwell for about 30 minutes and then build the rest of the stripper film thickness in a second application. Use a paint scraper or steel wool to remove paint before paint rehardens. The emulsified paint is then absorbed back into the paste as it dries on the cover. It's the only tried and tested method of removing multi-layers of paint from such surfaces without damaging the profiles.

If using masking tape, apply two layers of tape and remove the top layer immediately after application as the remover may soak through the tape, damaging paint under it. Apply a thick coat using a paint brush. Although in Strip Away, it is used in a much higher dilution ratio. The system comprises a ready mixed water-based thixotropic paste incorporating highly alkaline caustic soda that is spread or sprayed over a painted surface.